1. #1
    xXRajadoXx's Avatar Member
    Join Date
    Jan 2013
    Location
    Spain
    Posts
    83

    Darken the end of the track?

    Hello!

    I would ask of if you know as is done so that at the end of a track it gets dark gradually and can not see anything, as is simple but I can not for over I test area condition.

    Sorry my english

    Greetings!
    Share this post

  2. #2

    Re: Darken the end of the track?

    Link a curve data source (linear) to the camera exposure...
    Set start 100 end 0 duration 10 seconds or whatever seems to look ok.
    Make sure that you UNCHECK enabled so it isn't active.

    Now create a area trigger just past the finish line on the driving line.
    Link it to a state event ON event.
    link the state event to the curve data source.

    So when your rider crosses the finish line he will hit the area trigger causing the state event to enable the curve data source therefore winding the exposure on the camera down to 0 over 10 seconds or whatever you set the duration at.
    Share this post

  3. #3
    Morfyboy's Avatar Senior Member
    Join Date
    Mar 2014
    Location
    UK
    Posts
    8,183

    Re: Darken the end of the track?

    yep..^^^^^^ thats how to do it...ninjad me crue..
    Share this post

  4. #4

    Re: Darken the end of the track?

    Originally Posted by Morfyboy
    yep..^^^^^^ thats how to do it...ninjad me crue..
    LOL...
    All the time I was writing it I kept thinking... someone's gonna ninja me... someone's gonna ninja me... someone's gonna ninja me...
    Share this post

  5. #5
    xXRajadoXx's Avatar Member
    Join Date
    Jan 2013
    Location
    Spain
    Posts
    83

    Re: Darken the end of the track?

    Originally Posted by Cruelty976
    Link a curve data source (linear) to the camera exposure...
    Set start 100 end 0 duration 10 seconds or whatever seems to look ok.
    Make sure that you UNCHECK enabled so it isn't active.

    Now create a area trigger just past the finish line on the driving line.
    Link it to a state event ON event.
    link the state event to the curve data source.

    So when your rider crosses the finish line he will hit the area trigger causing the state event to enable the curve data source therefore winding the exposure on the camera down to 0 over 10 seconds or whatever you set the duration at.
    Thank you!!

    Now I will not have problems, thought he was otherwise haha

    Thanks ^^

    Greetings!
    Share this post