1. #1
    xXRajadoXx's Avatar Member
    Join Date
    Jan 2013
    Location
    Spain
    Posts
    83

    Rope wound on logs

    Hello!

    I have a question, have any idea if anyone knows.

    Is it possible that a rope is wound between two logs to hold? only ornament, it doesn't matter on the track

    I tried, but it seems more a snake that a rope, because having physical activated, starts to move much

    Thanks!
    Share this post

  2. #2

    Re: Rope wound on logs

    In big sands section, I think in wooden parts, there is logs with rope wrapped round already.
    Could just use 2 of them and a rope in between maybe...
    * assuming pc has big sands / ROD dlc...
    Share this post

  3. #3
    xXRajadoXx's Avatar Member
    Join Date
    Jan 2013
    Location
    Spain
    Posts
    83

    Re: Rope wound on logs

    No look wood with rope, unfortunately do not have the DLC

    I know I can use the knots out there, but do not have the result I seek

    Thanks!
    Share this post

  4. #4
    nannerdw's Avatar Senior Member
    Join Date
    Jan 2013
    Posts
    1,268

    Re: Rope wound on logs

    If it's not visible from the start of the track, you might be able to move the rope into position with physics turned on, and then disable its physics to freeze it in place.

    Or you might be able to use the the pipe valve object (the one that's a small wheel with 5 spokes), color it brown, and position a few of them so it looks like a rope wound around the log.
    Share this post

  5. #5
    xXRajadoXx's Avatar Member
    Join Date
    Jan 2013
    Location
    Spain
    Posts
    83

    Re: Rope wound on logs

    I will try to remove physical, to see if it holds.
    And what of the valve is a good idea, I had not thought so

    Thanks!
    Share this post