swinging bell with bell chime | Forums

[GAS_PR1CES]

can anyone shed some light on how i can make a bell swing side to side and have the bell ding at the appropiate time? thanks!

[Barrybarfly]

Glue the onjects together and move the glue pivot to the end of the rope (where it joins the support/beam). Then use an OPE to swing it (probably yaw, one of the rotations anyway). The duration of the swing will be half the duration of the curved data source you use as that will be set to inivert second half and to loop. So use an interval trigger with the appropriate timing to set off the bell sound effect.

[dasraizer]

i think for a more natural swing use Sine for the curved data source and uncheck invert second half and check if wanted loop, as sine goes from start to end to start over duration.