-
Re: Workshop of Secrets Elevator Tutorial (with images) Adv.
Heya,
sorry you appear to be having problems with this =/
Ok so your first image..
The reason for the trigger before the ramp not causing the lift to work could be two things.
1. Start checkpoint is too close to your lift. Sounds strange i know but this can sometimes cause problems with any physics based objects that are glued together.
Solution: Move start checkpoint away further to the left and try it again with the trigger before the ramp.
2. The object you want to turn physics on might be too far away from your trigger in its current position. This is sometimes related to the camera angle of the game.
Second image:
The triggers respond to other objects aswell not just the rider. If the trigger is only slightly touching your lift then it will activate before you even get there. Make sure your trigger is not touching any part of your lift. Physics based objects usually move on their own accord for a few seconds before stopping completely (usually out of sight of the camera).
To test this you will need to be in editor mode. Turn on real time physics (press back if i remember right), and just watch your lift and see if it moves about. If it moves alot, move your trigger a bit and try again.
Hope this helps