1. #1
    I have CH Fighter Stick USB, Pedals USB, and Pro Throttle. I tried to reset sliders after loading AEP, but the "window" doesn't respond to stick movements, and the Yaw is not given as an option. The controllers work in game, and they calibrate; I just can't adjust them like I'd like in the INPUT screen. Any help appreciated.
    Share this post

  2. #2
    I have CH Fighter Stick USB, Pedals USB, and Pro Throttle. I tried to reset sliders after loading AEP, but the "window" doesn't respond to stick movements, and the Yaw is not given as an option. The controllers work in game, and they calibrate; I just can't adjust them like I'd like in the INPUT screen. Any help appreciated.
    Share this post

  3. #3
    Hey Buster,

    D'you have your CH combo running as a "single virtual controller" using the CH Control Manager software? Doing that means the stick, throttle and pedals are recognised a single entity by Windows, and also in FB.

    With that set up, you will find that you can calibrate all of the axes in the FB Input window.

    Oh, and have you made sure that FB has recognised the axes? That's done in the HOTAS section of the FB Controls window. Highlight the box next to each axis and then move the appropriate piece of hardware. E.g. Highlight "Ailerons" then move the stick sideways. You'll see an axis ID appear in the space, and that's it. Do that for each axis, rudder, throttle, trim, whatever.

    Excuse me if you've already done that! I reckon the single virtual controller - i.e. using a CH "Combined Map" is your way forward.

    GL...write again if it doesn't work, or look here for friendly advice www.ch-hangar.com/
    Share this post

  4. #4
    The thing that I had to do: go to my IL2-Sturmovik folder, open the il2settings.exe (or something like that.) go to the Joystick Tab, and check the box "Use Joystick." it then worked.

    Hope this helps.

    <bgsound src="http://www.m00.sys-techs.net/record01.mp3" loop="infinite">
    Share this post

  5. #5
    LOL Dudey...you could well be right!
    Share this post