To Anyone With Framerate Issues: Check Your GPU Core Clock Speed | Forums

[HeavenPhantasm]

My System:

MSI MPG Z390 Gaming Pro Carbon AC
GeForce RTX 2080 Ti
Intel i9 9900K
16 GB Corsair Vengeance RGB Pro DDR4
Video Driver version 463.48

I've been playing Breakpoint for probably ten hours or so and have had terrible performance from the beginning. Lowering the settings helped somewhat, but with my system specs, I expected the game to be at least playable. I had framerates in the 10-20 range for long periods of time. I finally figured out what was happening: my gpu core clock speed wasn't boosting to the appropriate level. As I type this, the idle clock speed for my card is 435 Mhz. During gameplay, sometimes the core clock speed would drop to (and remain at) 350 Mhz, where it should be closer to 1700 Mhz. I suspect that many others with performance issues are experiencing the same problem. I use MSI Afterburner to monitor my clock speeds.

[Lightning3412]

And you corrected this how? GPU's are supposed to ramp up with load correct?

[Lerrok]

Are you using a g-sync monitor? Try disabling g-sync and restarting your computer if you are and see if there's any improvement.

[HeavenPhantasm]

I do use a GSync monitor. I have tried playing without GSync and I'm having the same issues. I figure I'll have to wait for another driver update.

[Quantum.9]

I7 9700k
GTX 1080 Ti
16 gb @ 3200
144hz G-SYNC

Playing on 2k resolution with temporal injection OFF (i find better graphics with TI OFF) ULTRA preset with volumetric fog on low.
70-80 fps depends on scenario.

Try manualy switching ur GPU to PERFORMANCE mode inthe nvidia settings.

[Joker13111973]

I7 7700K @4.20GHz
32GB RAM
ASUS STRIX-GTX1080 /8GB
Samsung C49HG90DMU with 3840x1080 / 144Hz
WD Black
All in Ultra no GSync or Vsync
HDR On

Fps 50-75 (in the Wood 50-60 in the Mountains 60-75)

No problems with the graphics. It runs smoothly and without jerking.

[HeavenPhantasm]

I figured it out. At some point, the slider for power limit % in msi afterburner was moved way below 100%. I feel stupid. I moved it back to 100% and everything is smooth again.

[trakkaman]

My System:

MSI MPG Z390 Gaming Pro Carbon AC
GeForce RTX 2080 Ti
Intel i9 9900K
16 GB Corsair Vengeance RGB Pro DDR4
Video Driver version 463.48.

Well that's a great pc but not sure why you have low 10-20 fps range?

Windows 10 Home
Version 1903
OS build 18362.388

Z370 mainboard
i7-8700
2080Ti founders edition
ram 16GB
m.2 ssd
2560x1440 144Hz G-Sync


Ghost Recon Breakpoint V.4382423

Standard geforce Driver version 436.48. Preset Ultimate, FidelityFX Sharpening 100. Framerate varies, lowest frames seen so far is 55fps, haven't covered every region in game yet.

[trakkaman]

I figured it out. At some point, the slider for power limit % in msi afterburner was moved way below 100%. I feel stupid. I moved it back to 100% and everything is smooth again.

Just noticed your post, lol. Is your framerate above 60 most of the time?