🛈 Announcement
Greetings! Ghost-Recon forums are now archived and accessible in read-only mode, please go to the new platform to discuss the game.
  1. #1

    Screen flashing when in thermal mode

    While I had the TAC-50 equipped, I went into thermal mode and then looked down the scope. As I was looking down the scope the screen started to flash like a strobe light. The image eventually got brighter and brighter making it extremely difficult to play without starting to feel slightly sick. I do have a video of it on my twitter page https://twitter.com/StiggyGaming
    Share this post

  2. #2

    Same bug as OP with some of my own details

    I had this bug occur, too. It happened yesterday, similar circumstances. In my situation I had a sniper (it was the SNR "L115A3") with a LR scope (the "T5XI Sight"). I was crawling through grass and then aimed down the sights and held my breath, I then stood up and sprinted. It continued in Standard and Night Vision, It stopped when I opened the Gear menu.

    Bug Clip 1 https://1drv.ms/v/s!Auk4nAL-Hc2AgpVmxOV1fa5Q3WTGXA 16 sec - This shows when it started
    Bug Clip 2 https://1drv.ms/v/s!Auk4nAL-Hc2AgpVnnT9s-mw710Njgg 23 sec - This shows some time in all Visions while looking around and such
    Bug Clip 3 https://1drv.ms/v/s!Auk4nAL-Hc2AgpVo097wkXw_W3u9Yw 15 sec - This is little more and then how I got it to stop

    Some extra details in case it may be at all useful, I was just outside of Whitestone Farm near the NW entrance. My character was in all black (guns and gear), I was playing on my Xbox One X (Scorpio Edition) and it was on Sept 6 at roughly 7 P.M. Eastern. xFi ISP (I'm sure that is most likely irrelevant)

    It gave me a pretty good headache, never had that happen before.
    Share this post

  3. #3
    I had this bug happen I had a 416 out and was sweeping a building at night. I switched from NV to Thermal and it started flashing like a strobe. Went back to normal and it was strobing white, I think i had to log out to get it to reset.
    Share this post

  4. #4
    Yes, annoying, happened when I was flashbanged using thermal on two occasions, had to open menu and close to fix it.
    Share this post

  5. #5
    UbiMorning's Avatar Community Representative
    Join Date
    Sep 2017
    Posts
    15,450
    Hey guys! Thank you for the reports. Have you tried these XB steps to see if it helped at all?
    We would specifically like players to report issues where they are unable to progress within the story. We appreciate any reports regarding animation, graphical issues, or audio issues, but these are things to expect within the beta.
    Please keep in mind that you have access to a small portion of the game during the beta phase, which is not representative of the final scope or quality of Tom Clancy’s Ghost Recon Breakpoint.
    Share this post

  6. #6
    Share this post

  7. #7

    I had this happen also

    I had this happen just by activating Thermal, what I did to correct it was switch over to my loadout after shutting off Thermal and it corrected the issue
    Share this post

  8. #8
    Ubi-Woofer's Avatar Ubisoft Support Staff
    Join Date
    Aug 2019
    Location
    United Kingdom
    Posts
    2,882
    Originally Posted by StiggyGaming Go to original post
    Originally Posted by NosFeratus70 Go to original post
    I had this happen just by activating Thermal, what I did to correct it was switch over to my loadout after shutting off Thermal and it corrected the issue
    Hey folks, thanks for these additional reports and for providing more information about the issue and how you went about correcting it.

    I'll pass this onto the team - it is a known issue currently under investigation!
    Share this post