🛈 Announcement
Greetings! The Division forums are now archived and accessible in read-only mode, please go to the new platform to discuss the game
  1. #1

    Please,I need Help(Lags, Freeze).

    Hello people.I don’t know what else can be done. I have a FX-8300 system (OC 3900mhz). 16gb / 1866mhz RAM. Window 10.64bit. Ssd kingston TLc 120gb. Video card GTX 1060 / 6gb.
    The problem is that I can’t play normally. After 5-10 minutes of the game. It doesn’t matter where you are. Problems begin. The character can run and be in the textures. Or the game freezes for 4-10 seconds.I have all the new drivers for the system or video. No RAM + 8GB Ram now added. I used to think that the brakes were due to the lack of RAM (it was 8GB). But that didn’t help either. I can’t play comfortably at high or ultra settings. Only medium or low. But even at full average settings, there are often lags and brakes for 5-10 seconds. This is especially problematic when you go through the operation. First, the sound disappears, and then the brakes start .and often the sound disappears during the shooting. It doesn’t matter what the graphics settings are. High or low. in the open world or somewhere on the mission. this can happen at the beginning of the battle .. in the middle. One go twice right away. the sound disappears for 5 seconds. ..ten...

    What should I do so that I can play comfortably? Is my computer power low so that I can play at high settings without problems?
    Share this post

  2. #2
    UbiMorning's Avatar Community Representative
    Join Date
    Sep 2017
    Posts
    15,450
    Hello Kpemen!

    I have a FX-8300 system (OC 3900mhz)
    This meets the minimum requirements, but not the recommended requirements. You should be able to play at 1080p at 30 fps

    If this is still happening at low settings, I'd recommend these PC steps. If they don't resolve your issue, please submit your MSINFO files for further assistance. Be sure to list off what troubleshooting steps you've done so far for better assistance.
    Share this post