1. #1
    emcee's Avatar Senior Member
    Join Date
    Nov 2010
    Posts
    1,747

    Lost my finish line.

    Hey guys im stressing out with this one, extended my track a few times and now I cant find my finish line Obviously this means I cant end the track, and can just ride until i run out of riding line. Any ideas of what I can do pls?

    Ive traced my whole line and made sure it isnt lost inside an object, it must have bugged out and vanished! there a way to make a new finish line?
    Share this post

  2. #2
    You can set the last checkpoint to have a
    Target of End Event, so when triggered, it triggers the end of the race.

    But I would like to know how you lost your Finish Line because bypassing the ending is the first step of driving freeroam without a driving line
    Share this post

  3. #3
    NOR-Storelumo's Avatar Member
    Join Date
    Apr 2014
    Location
    Norway
    Posts
    126
    I dont know what happend to your checkpoint, have you looked underground? You can move the camera under the ground surface, i'm sure can place things there too. If you don't have any luck finding it, you could maybe ad an "end" event next to a dummy checkpoint or something
    Maybe use an area trigger or hit trigger depending on what fits the ending best.

    Place a trigger next to an end event. Select the trigger, press the up arrow, scroll down to "on hit" and select the end event as the target.

    Hope this helps in some way
    Share this post

  4. #4
    dragonmicky1's Avatar Member
    Join Date
    Mar 2014
    Location
    France
    Posts
    103
    There is an object finder tool if you press down on Dpad... that can help you To find it
    Share this post

  5. #5
    emcee's Avatar Senior Member
    Join Date
    Nov 2010
    Posts
    1,747
    Thanks for the help guys. I have looked everywhere, even deleted objects near driving line to make sure i didnt cover it with anything by mistake. Thanks for the alternative solutions guys, I was starting to think my track could be fooked, and I put a lot of work into it!
    Share this post