Iron Horse / Fieser / Crucible moves, but crane remains in starting position
Hello folks,
We now played the Iron Horse raid for several times since TU 12.1 and found the following... strange... behavior with Fieser ever since this patch:
After successfully filling the crucible using the codes, you can interact with the control panel inside the control room as usual. The crucible then also moves upwards... so far so good. But it is in fact only (!) the crucible itself that's moving, not the crane. The crane remains in its lowered starting position.
This not only looks wrong, but is also very inconvenient as with the crane not moving with the crucible the weak points will not become exposed to be shot at from the control room. Fortunately, this is still possible from inside the foundry room, so progress is not blocked. Upon using the control panel again still only the "flying crucible" continues to move backwards until hovering magically in the air above the train. The crane itself remained in its starting position until the end.
And here's of course a picture of the magical flying crucible of wonders:
https://pw7anw.db.files.1drv.com/y4m...5-wtuwsqx3.png