PDA

View Full Version : Starting P-38- how?



CraytonRoberts
06-29-2004, 02:59 PM
To get the engine on the P-38 started in the BoE campaign, simply striking "I"key (which is ignition for all the other planes) it dosen't turn on the engines. I have to briefly use the Autopilot to turn them on, then go off autopilot. Should I jugger with Controls, so that each engine has to be started separately, or what?

CraytonRoberts
06-29-2004, 02:59 PM
To get the engine on the P-38 started in the BoE campaign, simply striking "I"key (which is ignition for all the other planes) it dosen't turn on the engines. I have to briefly use the Autopilot to turn them on, then go off autopilot. Should I jugger with Controls, so that each engine has to be started separately, or what?

VF-2_John_Banks
06-29-2004, 03:03 PM
Nah, you have to select the left and the right engine seperately. But to do so, you have to assign key commands first. Don't forget to select both engines afterwards http://ubbxforums.ubi.com/infopop/emoticons/icon_wink.gif.

Tully__
06-29-2004, 03:05 PM
Or restart the campaign with "Seperate Engine Start" difficulty setting turned off http://ubbxforums.ubi.com/infopop/emoticons/icon_wink.gif

=================================================


http://members.optusnet.com.au/tully_78th/sig.jpg

IL2 Forums Moderator
Forum Terms of Use (http://www.ubi.com/US/Info/TermsOfUse.htm)
Tully's X-45 profile (SST drivers) (http://members.optusnet.com.au/tully_78th/fb.zip)

Salut
Tully

F19_Ob
06-29-2004, 03:17 PM
Just assign a key for engine 1 and one for engine two and a third for all engines.

1 select engine 1 and hit "i" key to start and remember to idle the engine.

2 then select engine 2 and start it and idle it.

3 Select "all" engines and slowly throttle up and start taxiing to the runway. with all engines selected u wont end up crashing like it would if only one engine was selected.

4 smile while u rush onward.


This should get U of the ground http://ubbxforums.ubi.com/images/smiley/16x16_smiley-wink.gif

CraytonRoberts
06-29-2004, 04:27 PM
Thanks guys, I'll try that after work tonight.
Bob Roberts