PDA

View Full Version : Help with barrels and explosions



cpt_schland
04-28-2014, 07:55 AM
Hi guys,

i hope you can help me with my problem.

i want to set some barrels around the driving line and one or more explosions,
and when the trigger starts the explosions, the barrels should be affected by the explosions and they should be blown away.

I tried it with a simple explosion and activated the "physics" checkbox in the barrels properties menu, but this didn't work.

Can you give me a hint, how to set this thing right?

fleskeknoke
04-28-2014, 08:02 AM
leave the "physics" on on the barrel, then point an area trigger to a "brake-event" which points to the barrel.
Areatrigger->Brakeevent->Barrel

Lukeyy19
04-28-2014, 02:24 PM
Are you using the explosive objects or an explosion effect? If you're using an effect, when you look at it's properties, does it have an "apply damage" (or similar) checkbox?

cpt_schland
05-02-2014, 07:09 AM
Thanks for your help :)

It worked great with explosive objects :)

The Break-Event which points to the barrel doesn't work, because there are no breakable barrels in the editor,
or maybe i didn't find them.

fleskeknoke
05-02-2014, 09:34 AM
Thanks for your help :)

It worked great with explosive objects :)

The Break-Event which points to the barrel doesn't work, because there are no breakable barrels in the editor,
or maybe i didn't find them.

maby i misunderstood your question, i thought you was talking about the explosive barrels