PDA

View Full Version : Very important question- high end system problems



Transthermoman
02-10-2004, 09:12 PM
Hey guys, I just bought a new modulator chip for my re-route system indicator. It's usually running stable; the cyllindrycal indicator is reading 5.6 watts above the normal wavelength output and I HAVE NO IDEA how to re-route the system's main bus information through the phase 2 bypass modulator. It's CANNOT translate the data with a low graphics settings, because when I shoot the indicator goes red, and I MEAN RED it hits up to 10 farren joules... How much do the new Remote Access systems go for? Any ideas?

Transthermoman
02-10-2004, 09:12 PM
Hey guys, I just bought a new modulator chip for my re-route system indicator. It's usually running stable; the cyllindrycal indicator is reading 5.6 watts above the normal wavelength output and I HAVE NO IDEA how to re-route the system's main bus information through the phase 2 bypass modulator. It's CANNOT translate the data with a low graphics settings, because when I shoot the indicator goes red, and I MEAN RED it hits up to 10 farren joules... How much do the new Remote Access systems go for? Any ideas?

Transthermoman
02-10-2004, 09:18 PM
Wait... correction... I'm looking for the Access System 4H version not the original... Thanks.

GaseousEnigma
02-10-2004, 09:20 PM
Really? I just bought the same thing. But when I rerouted my thermal intake transistors to the main bus sequence, you should be able to bypass the system rotary and produce just the right amount of watts from your cylindrical indicator. Your phase 2 bypass modulator is easy to fix. Basically, rerun the optical stream of illuminant strands. Connect the ground to the piston valves and YOU MUST access the extraction chamber to enable your modulator. Hope this helps.

-Gas

LEXX_Luthor
02-10-2004, 09:25 PM
Troll, from ---> http://www.startrek.com


But once you go LEXX, you never go back. Damn Canadians. http://ubbxforums.ubi.com/infopop/emoticons/icon_mad.gif



__________________
New Zealand's Cleopatra Sunday mornings USA StarGate Channel (5-6 AM EST lol http://ubbxforums.ubi.com/infopop/emoticons/icon_biggrin.gif )
http://www.xenite.org/exchange/standard/cleorenpictures.jpg (http://www.sf-fandom.com/vbulletin/forumdisplay.php?s=&forumid=19)
Cleo is a screaming bi*ch, hel is a walking dead beet, Sarge just want sex.
---> http://linked.kalleboo.com/scream.jpg

GregorySmith714
02-10-2004, 09:30 PM
Well, as a short answer to your elememtary hardware problem http://ubbxforums.ubi.com/images/smiley/16x16_smiley-indifferent.gif. You probably havent checked your rotary spherical flux function within your Bios diagnostic thermal initiative cyndrical folder on the sector 7 main bus process dio board. When you find that you have to go to reticle s-7 in hyphonical accelerator mother chip system and reboot the pro-phonix colonuclar asset. Thats basically it until you get into the physiciological associatian glocar multi-range helo float.

http://ubbxforums.ubi.com/images/smiley/crazy.gif
Gregory

Transthermoman
02-10-2004, 09:32 PM
Woa, slow down there partner do I stress system bus 5 or 7?

Thanks for the help, Alpha-Zeta numerical values FOR LIFE!

ZG77_Lignite
02-10-2004, 09:51 PM
Sheeze, everybody knows its the _S-6_ reticle in the hyphonical system. And I wish you guys would learn how to spell, I mean: 'glocar'??!?!? Its GLOCULAR!~!~! Try to keep these things straight huh?

Transthermoman
02-11-2004, 04:45 AM
Alright I was up all night having to totally revamp my main bus' over drive translate mechanism. The circular combobulator had a slight shimmy and it made me have to tighten the fastening screw under point 6S to secure the connection of the bypass coils. Seems to be running stable at about 56 milli-delsems. So basically, access systems with sub-root hubs are insufficient.

SeaFireLIV
02-11-2004, 04:55 AM
Sorry, I`m still looking for the dictionary....

SeaFireLIV...

http://img12.photobucket.com/albums/v31/SeaFireLIV/LAlowblue.jpg

LEXX_Luthor
02-11-2004, 08:22 AM
Captain Stanley, how does this work?

Ha I don't know, it just works. How about you and me, you know...

*SLAP*

Hey why'd you do that for?



__________________
RUSSIAN lexx website http://www.lexx.ufo.ru/members.shtml
Stanly is a moron, kai is a walking dead beet, Xev just want sex.
:
you will still have FB , you will lose nothing ~WUAF_Badsight
I had actually pre ordered CFS3 and I couldnt wait... ~Bearcat99
Gladiator and Falco, elegant weapons of a more civilized age ~ElAurens

tsisqua
02-11-2004, 12:39 PM
This is the funniest damn thing that I have seen in weeks http://ubbxforums.ubi.com/infopop/emoticons/icon_biggrin.gif!

Tsisqua

http://server5.uploadit.org/files/tsisqua-nedChristie.jpg
Tsalagi Asgaya Galvladi

Stormer777
02-11-2004, 01:03 PM
?????

Destraex
02-11-2004, 01:06 PM
test

DuxCorvan
02-11-2004, 01:22 PM
I knew a girl who had a problem: any time she used a text processor there appeared random spacing among words and characters as she was typing.

She told me to help her, and she showed me how it happened. I tried to type myself and everything was OK. I was struggling with Word autotext options for an hour without a clue. Then she showed me how it happened again.

And this time I saw how near of the keyboard she sat, and how her big t1ts stroke the space bar once and again as she typed. I didn't want her to embarrass -for I wanted to take a closer look to her attributes later.

So, I told her a story like that on the beginning of this thread, and conclude it was her metallic chair that was interfering with 'microwave impulses from the BUS to the logical ports'. I suggested her not to get her chair to close to computer, and surprisingly the problem was solved.

She was really grateful -and she showed some days later! http://ubbxforums.ubi.com/infopop/emoticons/icon_wink.gif

- Dux Corvan -
http://www.uploadit.org/DuxCorvan/Altamira2.jpg
Ten thousand years of Cantabrian skinning.

Falcon_41
02-11-2004, 01:22 PM
Gah!

Who uses combobulators with flux capacitors these days!

The proper action is to return the creases, which are the inside edges of the crease markings, shall be at right angles to the popping crease at a distance of 4ft 4 in/1.32m either side of the imaginary line joining the centres of the two middle stumps. Each return crease shall be marked from the popping crease to a minimum of 8ft/2.44m behind it and shall be considered to be unlimited in length.

Right?


Valk!

http://hometown.aol.com/ifalkon/myhomepage/fis_banner_09%20newstyle.gif

Wing_Over
02-11-2004, 01:54 PM
Gheez.....you ppl freak me out... http://ubbxforums.ubi.com/images/smiley/16x16_smiley-very-happy.gif

VW-IceFire
02-11-2004, 01:56 PM
Must be how we sound to other people http://ubbxforums.ubi.com/infopop/emoticons/icon_biggrin.gif

http://home.cogeco.ca/~cczerneda/sigs/temp_sig1.jpg
The New IL2 Database is Coming Soon!

GaseousEnigma
02-11-2004, 02:23 PM
I think they are mocking you. Someone said flux capacitor, like in Back To The Future. I guess they dont really know how to solve the rerouting problem in section 4 on the bus system. The cable connecting the optical and cylindrical valves together, has probably been severed. If this was so, your low graphics would correlate directly to the metallic syndricator which is located on your mega-newton amp. Check and tell me how it works.

-Gas

BaldieJr
02-11-2004, 02:45 PM
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Transthermoman:
Hey guys, I just bought a new modulator chip for my re-route system indicator. It's usually running stable; the cyllindrycal indicator is reading 5.6 watts above the normal wavelength output and I HAVE NO IDEA how to re-route the system's main bus information through the phase 2 bypass modulator. It's CANNOT translate the data with a low graphics settings, because when I shoot the indicator goes red, and I MEAN RED it hits up to 10 farren joules... How much do the new Remote Access systems go for? Any ideas?<HR></BLOCKQUOTE>


Expect to spend a grand.

<pre class="ip-ubbcode-code-pre">
______ _____
(, / ) /) /) , (, /
/---( _ // _(/ _ / __ ,""""]
+----/ ____)(_(_(/_(_(__(__(/____/__/ (__--------,' /---+
| / ( / ,' NR / |
|(_/ ..-""``"'-._ (_/ __,' 42 _/ |
+-.-"" "-..,____________/7,.--"" __]-----+

</pre>

Transthermoman
02-11-2004, 07:00 PM
A grand? hardly my friend, these systems go for a somewhat cheap price around what you can get a re-tuner system frame A device for. A grand could get me a whole set of new system modulators, not just the ones with dual access, the ones with the tranversal data initiators. They can multiply your converstion data access onformation twice as fast as the stock system connectors. You have no idea.

Willi_Wombat
02-11-2004, 07:17 PM
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by GaseousEnigma:
I think they are mocking you. Someone said flux capacitor, like in Back To The Future. <HR></BLOCKQUOTE>

Combobulator and hyphonical accelerator didn't get you, but flux capacitor did?

You must not know much about gyrotechnics.

WW

BaldieJr
02-11-2004, 07:18 PM
I invented tranversal data initiators, don't be foolish.

Prior to present-day modulation schemes, we assembled each emitter using a very small p-type and a very small n-type BY HAND, which isn't easy. Since inertia dampening hadn't even been concieved, we decoupled using a standard tuning fork. You may remember, at one point, only those with perfect pitch could do it. Ah, those were the days.

My first flight-sim was pictures drawn on the page-edges of my Enigma operations manual. http://ubbxforums.ubi.com/images/smiley/blink.gif

<pre class="ip-ubbcode-code-pre">
______ _____
(, / ) /) /) , (, /
/---( _ // _(/ _ / __ ,""""]
+----/ ____)(_(_(/_(_(__(__(/____/__/ (__--------,' /---+
| / ( / ,' NR / |
|(_/ ..-""``"'-._ (_/ __,' 42 _/ |
+-.-"" "-..,____________/7,.--"" __]-----+

</pre>

Transthermoman
02-11-2004, 07:43 PM
How were you able to divide the main process booth from the two undervolt meters? I tried about 5.5 times to translate the code into halo-elergenic code but it kept giving me an error analysis of Terta over half the sequence's square root. I was extremely puzzled at this point so I scraped the whole system's under-bus all together. Was that the right thing to do?

dugong
02-11-2004, 08:00 PM
Foo!

Willi_Wombat
02-11-2004, 09:24 PM
Yeah, yeah, but did you ever, you know, do that thing with that doo-hicky and, you know the whatzitz with the whatcha-macallit framitz with the floi-floi?

Huh, huh?

WW

T_O_A_D
02-11-2004, 09:37 PM
You obviously have a "I D Ten T" error!



ID10T http://ubbxforums.ubi.com/infopop/emoticons/icon_wink.gif

Have you checked your Private Topics recently? (http://forums.ubi.com/eve/forums?a=ugtpc&s=400102)
131st_Toad's Squad link (http://www.geocities.com/vfw_131st/)
My TrackIR fix, Read the whole thread (http://forums.ubi.com/eve/forums?q=Y&a=tpc&s=400102&f=49310655&m=15310285&p=1)
2.11 drivers (http://home.mchsi.com/~131st-vfw/NaturalPoint_trackIR_2_11.exe)
http://home.mchsi.com/~131st_vfw/T_O_A_D.jpg

ElektroFredrik
02-12-2004, 06:01 AM
Ask Tufty. He knows http://ubbxforums.ubi.com/infopop/emoticons/icon_biggrin.gif

http://www.scarysquirrel.org/tufty/tuftyclub/badge2.gif

http://fanart.lionking.org/imgarchive/FanArt/NisseNjursten/profile.jpg
"What I study is sex and squirrels"

BaldieJr
02-12-2004, 06:50 AM
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Transthermoman:
How were you able to divide the main process booth from the two undervolt meters? I tried about 5.5 times to translate the code into halo-elergenic code but it kept giving me an error analysis of Terta over half the sequence's square root. I was extremely puzzled at this point so I scraped the whole system's under-bus all together. Was that the right thing to do?<HR></BLOCKQUOTE>

No. Clearly, you have not watched enough action movies.

Snip the blue wire, problem solved. This is BaldieJr's 2nd law of techno-dynamics.

<pre class="ip-ubbcode-code-pre">
______ _____
(, / ) /) /) , (, /
/---( _ // _(/ _ / __ ,""""]
+----/ ____)(_(_(/_(_(__(__(/____/__/ (__--------,' /---+
| / ( / ,' NR / |
|(_/ ..-""``"'-._ (_/ __,' 42 _/ |
+-.-"" "-..,____________/7,.--"" __]-----+

</pre>

DuxCorvan
02-12-2004, 09:29 AM
Stop burning your fuses. Just a word:

IDKI (Indirect Daedalus Kerythen Indicator)

This is the site:
http://www.kerythen-industries.com/troll/IDKI023

You must be now very ashamed to realize how simple solution was, aren't you?