PDA

View Full Version : usb ch pedals setup



onebox33
06-25-2006, 11:15 AM
all is working fine without drivers or additional software...but when i open the input section of il2 i see only rudder input of joy, instead in fly the rudder of joy doesn't work and pedals are fine...it is the right way?
thx http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif

onebox33
06-25-2006, 11:15 AM
all is working fine without drivers or additional software...but when i open the input section of il2 i see only rudder input of joy, instead in fly the rudder of joy doesn't work and pedals are fine...it is the right way?
thx http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif

OD_79
06-25-2006, 12:38 PM
Do you just use the pedals or do you have any other CH products kit?
If not there is nothing you can do about it, otherwise you combine the stick and the pedals in the CH Pro Control manager.

OD.

HitchHikerHSDWG
06-25-2006, 12:54 PM
I think CH products are only compatible with CH products. If you dont have a CH joystick I think you have to edit some config files in the game to get it to work. I was asking a similiar question not long ago because I have a Saitek X52 joystick and was thinking about getting CH pedals. If you have CH products then I'm not sure what the problem is but if not you may check into this. I decided to wait for the Saitek rudder pedals coming out soon.

onebox33
06-27-2006, 07:27 PM
yes i have an other joy...but it is not a problem i edited the config to change values and then come back to all 100, imo is better http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif

WTE_Galway
06-27-2006, 07:45 PM
CH pedals work fine with my MSFFB2 .. i just map the right brake pedal to brakes and the rudders to yaw and off i go

the rudder sensitivity adjustment in game is for the twist rudder on the stick .. if you want to play with the pedal sensitivities you need to go into the config files and find the correct line but I have never bothered .. standard works fine

note ... you cant do much about brake pedal sensitivites as the IL2 adjustment assumes they are a "centred axis" not a one way axis like throttle so playing with foot brake sensitivities is likely to do something rather weird

steve_v
06-27-2006, 08:42 PM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by onebox33:
all is working fine without drivers or additional software...but when i open the input section of il2 i see only rudder input of joy, instead in fly the rudder of joy doesn't work and pedals are fine...it is the right way?
thx http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif </div></BLOCKQUOTE>simple explanation give here: http://www.airwarfare.com/tech/sticks.htm

HQ1
06-27-2006, 08:45 PM
onebox I think your problem is on win XP always sets CH pedal as primary input device. for example if you use CH pedal and X45 in combination.XP will designate CH is primary and X45 is secondary. il2 only displays the primary device setup. You can open il2's config file where you can find it in il2's root folder. and find joystick setting section. and edit X45's profile. In il2 key setup you can appiont your joy axis to the plane 's axis which you want. http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif

Vacillator
06-28-2006, 06:45 AM
What Steve said...

Just to clear things up HitchHikerHSDWG, CH pedals work fine with other makes of stick. I have the X52 / CH USB pedal setup you mention and it works a treat.