PDA

View Full Version : QMB and the BF109



capt_frank
03-01-2006, 05:49 AM
everytime i launch the QMB on my rig with any BF109 i immediately hear the warning horn...and it wont stop unless i lower my gear. i've got my flaps on a slider and i'm certain they are in the uprite position.

any thoughts? thanks

Capt.LoneRanger
03-01-2006, 05:52 AM
Recalibrate your flap-axis or simply delete the mapping and test it.

For a more easy check: Hit F2 and check the position of the flaps.

Cajun76
03-01-2006, 05:52 AM
Re calibrate your slider, because the only time the horm sounds is when your flaps are down but your gear isn't. Since they're on a slider, it might be only 1% that's causing the problem. Hope this helps, good luck and

Wilburnator
03-01-2006, 07:59 AM
I have my flaps mapped to what would be the right toe brake (if the game supported that) and I had to create a deadzone at the first bit of travel with my CH control manager unless I wanted to apply constant heavy heel pressure to silence the horn.

As mentioned above, the slightest activation of that axis sounds the horn.

capt_frank
03-07-2006, 04:44 AM
thanks guys!

frank