PDA

View Full Version : Sensitivity settings for CH Fighterstick



kSetuni
03-08-2005, 10:00 AM
Hi everyone,

I had been using the tried and true sensitivity settings for my X45 that can be found in the thread here: http://forums.ubi.com/eve/forums?a=tpc&s=400102&f=26310365&m=9941030762

However, I just upgraded to a complete CH fighterstick/Pro throttle setup and I was wondering what people that use the Fighterstick have their sensitivity settings at?. I have heard that X52 users run 100 in nearly everything, and I was wondering if this hold true with the Fighterstick?

Thanks,

S.M.

x6BL_Brando
03-08-2005, 12:16 PM
These work well for me - reputed to be Oleg's personal settings - who knows? http://forums.ubi.com/groupee_common/emoticons/icon_wink.gif

From my conf. file....

(pitch)
Y= 0 0 5 10 17 25 33 43 54 71 100 0

(roll)
X= 0 0 3 7 15 25 35 50 66 84 100 0

(yaw)
X= 0 0 8 19 29 39 51 62 75 86 100 0

Alexi_Alx_Anova
03-08-2005, 12:48 PM
Should have been posted in Community Help

I set my Yaw & Pitch to 100% across the board in FB/PF and then set the sensitivity of the stick using CH Manager. From memory I use just a couple of clicks on the graph to make it sinusoidal.

DRB_Hookech0
03-08-2005, 12:54 PM
I start mine at around 25 and go up to 100 on the left.

the CH sticks are way more precise so if you try them at 100 across the board, it is waaaay to twichy

Iron_Hand1
03-08-2005, 12:54 PM
S.M
go here for CH tips n info.
http://www.ch-hangar.com/forum/

Tully__
03-08-2005, 04:34 PM
Click the "Joysticks..." link under my signature picture and read the section on "Setting up sensitivity". It may help you understand what the settings are doing for you.