PDA

View Full Version : [rts_joystick]



XyZspineZyX
09-18-2003, 06:32 PM
Can anyone tell me wich one of these axises is for the wheel on my stick I use the wheel/slider on my stick for PP but its way to sensitive & I need to make it more precise ive already tryed toning it down with the ch controll manager but its still way to sensitive If you put the wrong PP for just 2 seconds your engine is wasted so this is very important for 109s Please anyone know how to change the sensitivity for the PP on a slider in the game ?



[rts_joystick]
X=0 10 20 30 40 50 60 70 80 90 100 0
Y=0 10 20 30 40 50 60 70 80 90 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 4 14 24 34 44 54 64 74 84 100 0
1Y=0 4 14 24 34 45 54 64 74 84 94 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0
1RZ=0 0 1 3 6 10 16 25 37 45 45 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0
1X1=0 100 100 100 100 100 100 100 100 100 100 0
1Y1=0 100 100 100 100 100 100 100 100 100 100 0
1Z1=0 100 100 100 100 100 100 100 100 100 100 0

<center> http://www.onpoi.net/ah/pics/users/ah_109_1063229517.jpg </center>

XyZspineZyX
09-18-2003, 06:32 PM
Can anyone tell me wich one of these axises is for the wheel on my stick I use the wheel/slider on my stick for PP but its way to sensitive & I need to make it more precise ive already tryed toning it down with the ch controll manager but its still way to sensitive If you put the wrong PP for just 2 seconds your engine is wasted so this is very important for 109s Please anyone know how to change the sensitivity for the PP on a slider in the game ?



[rts_joystick]
X=0 10 20 30 40 50 60 70 80 90 100 0
Y=0 10 20 30 40 50 60 70 80 90 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 4 14 24 34 44 54 64 74 84 100 0
1Y=0 4 14 24 34 45 54 64 74 84 94 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0
1RZ=0 0 1 3 6 10 16 25 37 45 45 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0
1X1=0 100 100 100 100 100 100 100 100 100 100 0
1Y1=0 100 100 100 100 100 100 100 100 100 100 0
1Z1=0 100 100 100 100 100 100 100 100 100 100 0

<center> http://www.onpoi.net/ah/pics/users/ah_109_1063229517.jpg </center>

XyZspineZyX
09-18-2003, 08:17 PM
I could be wrong here...

The wheel (throttle) is not an axis that gets centered. [rts_joystick] settings are to adjust how sensitive an axis is in the center.So wheel doesnt have a setting in [rts_joystick].


I think that the coarseness of your wheel is due to a less sensitive pot used for the wheel.if that is right then its the joystick itself.