View Full Version : 190 Drivers

07-14-2007, 09:03 PM
What kind of convergance ranges do you use, myself i set my cannons at 275 and machine guns at 300 or 350.I like to keep my machine guns a little higher so i can help out friends who are getting tailed hopefully to force the bandit to break off.Was curious to see what works for others, i have tried down to 175 on my cannons but it has to be the perfect bounce or deflection but in a 190 usually i don,t get in that close on high manouvering aircraft unless he,s hanging.

07-14-2007, 09:31 PM
normally i use 120/100 m only if i have to intercept bomber i use 250/250m

07-14-2007, 09:54 PM
370m for inner cannons and guns, and 300m for outer cannons.

07-14-2007, 10:34 PM
500 m for bomber intercepts. Set up the head-on, and let them eat lead.

This convergence is also useful for fighters. Note, however, that I'm talking about the Anton. I don't fly the Dora. More specifically, I'm talking about the Anton with four 20 mm. No MK108s in the wings.

Normal convergence for me is 250-290 m, all guns the same.


07-15-2007, 01:02 AM
150 for both, I find gives the best for short and long range. At close range you blast away with all guns and at long range just use the inner guns which gives you and effective range of about 350m

07-15-2007, 01:25 PM
I use 350 for the Mg's and 350 for the cannon.

I have this setting for all planes because I tend to fire from a large distance alot of the time.

Having 350m means you have quite effective fire between 150m and 550m.

If you have it set too close, such as 150m, then at 350m the distance between your bullet streams on wing mounted weapons is going to be wider than the enemy aircraft, you will miss horribly.

I realise that you need to hit at convergerance to do damage with MG only planes, but on cannon armed FW190's you only have to get a few single rounds to hit to do serious damage. Therefore 350m seems to suit me well.

If I was flying MG armed planes only I would probably bring down the convergeance to around 250m. You need concentrated fire for MG.

07-15-2007, 01:54 PM
only for fw-190 drivers.. http://forums.ubi.com/images/smilies/10.gif


07-15-2007, 02:07 PM
As usual 200 for both. Maybe 300 on the nose but for me I always set wing mount guns to 200. But no matter what it depends on the person and where they typically fire. Best way is to load up QMB with a bunch of friendlies to shoot at and determine what your convergence should be that way.


07-15-2007, 02:24 PM
175/225 cannon/mg

07-15-2007, 03:32 PM
150/150. I never shoot from greater distance.

07-15-2007, 04:11 PM
500m inner,
120m outer cannons

07-16-2007, 06:27 AM
700 cannons
720 mg

07-16-2007, 06:32 AM
Fighter = both 250m
Bombers = both 900m