PDA

View Full Version : How to use MW50



anasteksi
01-21-2006, 06:15 AM
When flying bf109 K4 every time i try to use mw50 my engine blows up. So how to use it the way it won't blow my engine?

anasteksi
01-21-2006, 06:15 AM
When flying bf109 K4 every time i try to use mw50 my engine blows up. So how to use it the way it won't blow my engine?

WOLFMondo
01-21-2006, 06:22 AM
Reduce the throttle to 0 RPM's then engage it.

anasteksi
01-21-2006, 06:25 AM
and the put throttle back to 110%?

XyZspineZyX
01-21-2006, 06:47 AM
Yes you can go to 110% however eventually you will do a bearing or cook & seize your motor try 100 or 105% & the minute you hit overheat reduce throttle

JG52_Helgstrand
01-21-2006, 07:34 AM
Start engine, turn on MW50 at 0 throttle, take off, leave it on....It only works when you go over 100% throttle.

I've also heard it said it's good prime the engine by going to 100% and back to 0 before take off.
I do it out of habit but I know squad members who don't and they have no problem.

anasteksi
01-21-2006, 09:34 AM
thanks for the quick answers mates! those tips helped me a lot http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif

major_setback
01-21-2006, 09:45 AM
I thought I'd never get it working..thanks.

danjama
01-21-2006, 11:42 AM
The same goes for the 1945 FW190D, just in case you ever fly that http://forums.ubi.com/groupee_common/emoticons/icon_wink.gif

K-a-k-e
01-21-2006, 08:12 PM
as i just said in earlier post, you DO NOT NEED to put throttle 0%. 100% is enough just make sure its not over 100, 101 will break it. and it WILL give more power when its on even under 100%. gods sake have you ppl even tried it before posting? http://forums.ubi.com/groupee_common/emoticons/icon_smile.gif

Wilburnator
01-22-2006, 10:52 AM
^ What he said... all you need to do is set the throttle to less than 100% when you apply it. That's it.