PDA

View Full Version : Rudder Help



Advina
06-24-2004, 05:03 PM
I just got CH Pro USB Rudder pedals that I am using with my X-45. However, I cannot adjust the sensitivities for the joystick, only the rudder pedals. In the "input" screen, when I select pitch or roll I can only configure the dead zone and sensitivities for the two toe brakes on the CH Pedals. I have no way of adjusting it for my X45. BTW: In the HOTAS setup screen, when I assign something to my X45 it is labelled as x-axis ID2, Y-axis ID2, etc. When I assign something to my pedals, it is just called X-Axis or Y-Axis. Any ideas?

Advina
06-24-2004, 05:03 PM
I just got CH Pro USB Rudder pedals that I am using with my X-45. However, I cannot adjust the sensitivities for the joystick, only the rudder pedals. In the "input" screen, when I select pitch or roll I can only configure the dead zone and sensitivities for the two toe brakes on the CH Pedals. I have no way of adjusting it for my X45. BTW: In the HOTAS setup screen, when I assign something to my X45 it is labelled as x-axis ID2, Y-axis ID2, etc. When I assign something to my pedals, it is just called X-Axis or Y-Axis. Any ideas?

tHeBaLrOgRoCkS
06-24-2004, 05:11 PM
I have just been doing the same thing with my recently aquired gameport version of the ch pro and I believe the problem is that the rudder pedals take id1 by default I dont know if there is anything you can do from within the game but I suspect you will have to edit them within the Conf.ini do a search in these forums for rudder pedals and you will find a lot of links on this subject. Sorry I cant be more help but like I said I am working on the same issue my self. If I make any massive break through I will be sure and post here for yah. Good luck

tHeBaLrOgRoCkS
06-24-2004, 05:16 PM
http://www.ch-hangar.com/

You could also try looking here

Advina
06-25-2004, 09:44 AM
I found a solution on the forum. You have to edit the conf.ini file like you said. In the file, under joystick rts, your pedals will be listed as 1X, 1Y, and 1Z. Your other joystick will be 1X1, 1Y1, 1Z1, 1V1, etc. The numbers next to those axis represent the sensitivities. The first one is the dead zone, which ranges 0 to 50 (I use 8). The next ones are the actual joystick senstivities, 1 to 100. I am not sure what the last number is, but it is always a 0 for some reason.

Tully__
06-25-2004, 10:22 AM
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Advina:
...I am not sure what the last number is, but it is always a 0 for some reason....<HR></BLOCKQUOTE>

Filtering, 0-50 same as deadband.

=================================================


http://members.optusnet.com.au/tully_78th/sig.jpg

IL2 Forums Moderator
Forum Terms of Use (http://www.ubi.com/US/Info/TermsOfUse.htm)
Tully's X-45 profile (SST drivers) (http://members.optusnet.com.au/tully_78th/fb.zip)

Salut
Tully